Symbol ® Barcode Scanners and Wearable Computers Reset

Symbol ® Barcode Scanners Soft - Hard - Factory Reset
Symbol MT2000 Soft - Hard Reset (Warm - Cold Boot)

MT2000 Soft Reset - Warm Boot

1. Press and hold the 2 key and the Scan Trigger simultaneously for 5 seconds.

MT2000 Hard Reset - Cold Boot

1. Press and hold the 2 key and the Scan Trigger simultaneously for 10 seconds.

Symbol Barcode Scanners Factory Reset

Barcode Scanners Factory Reset

DS3407 DS3408 DS3478 DS3508 DS3578 DS4208 DS457-SR DS6708 DS9208 DS9808LS2208
LS3008 LS3408-ER /FZ LS3478-ER /FZ LS3578-ER /FZ LS4208 LS4278 P470 P370 P360


1. Close all applications and ensure your software is not running.
2. Scan the “Set All Defaults” barcode from Product Reference Guide.




3. Scan the “HID Keyboard Emulation” barcode From Product Reference Guide.




  The barcode scanner should now be restored to the factory settings.


Symbol ® Wearable Computers Soft - Hard - Factory Reset
Symbol RS507 Soft - Hard - Factory Reset (Warm - Cold Boot)

RS507 Soft Reset - Warm Boot

1. Press and hold the Restore Key for more than 6 seconds.


RS507 Hard Reset - Cold Boot

1. Remove and reinsert the battery into the Imager.
2. When using a corded Imager model with WT4090, remove and reconnect
   the interface cable that connects between the Imager and the WT4090.

RS507 Factory Reset

1. Remove battery or disconnect the Corded Adapter.
2. Press and hold the Restore Key.
3. Insert the battery or Corded Adapter into the Imager.
4. Continue to press and hold the Restore Key for about 5 seconds
   until a chirp is heard and the Scan LEDs flash green.  

Symbol WT41N0 Soft - Hard Reset (Warm - Cold Boot)

WT41N0 Soft Reset - Warm Boot

1. Hold down the Power button for approximately 5 seconds.
2. As soon as the wearable terminal starts to perform a warm boot release the Power button


WT41N0 Hard Reset - Cold Boot

1. Press and simultaneously hold the 1, 9 and Power button.

Symbol WT41N0 VOW Soft - Hard Reset (Warm - Cold Boot)

WT41N0 VOW Soft Reset - Warm Boot

1. Hold down the Power button for approximately 5 seconds.
2. As soon as the wearable terminal starts to perform a warm boot release the Power button.


WT41N0 VOW Hard Reset - Cold Boot

1. Press and simultaneously hold the P1, P2 and Power button.


Symbol WT4070 / WT4090 Soft - Hard Reset (Warm - Cold Boot)

WT4070 / WT4090 Soft Reset - Warm Boot

1. Hold down the Power button for approximately 5 seconds.
2. As soon as the wearable terminal starts to perform a warm boot release the Power button


WT4070 / WT4090 Hard Reset - Cold Boot

1. Simultaneously hold the 1, 9 and Power button.
2. The wearable terminal initializes.


Symbol WWC1000 Soft - Hard Reset (Warm - Cold Boot)

WT4070 / WT4090 Soft Reset - Warm Boot

1. Press P1 + ENTER button.
2. Press and release the Power button.
3. Release P1 + ENTER button. The WWC 1000 displays a copyright message,
   RAM size, expanded memory RAM size, etc., depending on the system's configuration.


WT4070 / WT4090 Hard Reset - Cold Boot

1. Press RightArrow + ENTER button.
2. Press and release the Power button.
3. Release RightArrow + ENTER button.

Symbol SB1 Soft - Hard Reset (Warm - Cold Boot)

SB1 Hard Reset - Cold Boot

1. Simultaneously press and hold the Home and Scan buttons for 5 seconds.
2. When the SB1 beeps release the buttons and Then it resets.